Book
TOC
Chapter
TOC
Search
Quit
1-50
3
Press 1 to select a 12 hour Clock Mode or, Press 2 to select a 24
hour Clock Mode.
Setting the Date and Time
The current date and time are shown in the display when the
machine is on and ready for use (Standby mode). The date and
time are printed on all faxes you send.
1
Press the Menu button, then press the Date & Time button on
the one-touch keypad. The current date and time are displayed.
A flashing cursor in the display prompts you to enter the date.
2
Using the number keypad, enter the current date using a
MMDDYYYY date format. If you make a mistake, use the
right and left buttons to move the cursor to the digit you wish to
change.
After entering the date the flashing cursor will move into the
first digit of the time.
3
Using the number keypad, enter the current time. Remember to
enter the time according to the current Clock Mode setting (12
or 24 hour format). Refer to the previous section,
for details.
04-30-1999
08:29 (AM)
Next Page
Previous Page
