Book
TOC
Chapter
TOC
Search
Quit
1-42
4
To return to Standby mode, press the Stop button.
Default Settings
The default print resolution and contrast can be set to their most
frequently used modes. Whenever a document is sent or copied,
the home contrast and resolution mode will be activated unless
otherwise changed by using the Resolution or Contrast button on
the control panel.
1
Press the Menu button, then press the System Setup button on
the one-touch keypad. The display indicates RINGER
VOLUME ?.
2
Press the Up or Down button until DEFAULT SETTING ?
appears.
3
Press the Start/Enter button. The display prompts you to
choose Resolution or Contrast.
4
Press 1. or press the Start/Enter button to enter the Default
Resolution set up menu. You may also use the Up and Down
buttons to select 1. RESOLUTION.
1.RESOLUTION
2.CONTRAST
DEF. RESOLUTION
[ FINE ]
Next Page
Previous Page
