Xerox DocuColor 12/DCCS50, Service Manual

Page: 1121 / 1617

1/05
8b-7 DocuColor 12/DCCS50
REP 15-1
Convenience Stapler
Reissue
REP 15-1 Convenience Stapler Internal DC Harness
Parts List on PL 16.1
Removal
1. Disconnect the Convenience Stapler Harness from the back of the Convenience Stapler.
2. Remove the bottom plate from the Convenience Stapler ( Figure 1 ).
3. Remove the Convenience Stapler Internal DC Harness ( Figure 2 ).
Figure 1 Remove the Plate
Figure 2 Remove the Harness
Replacement
1. Install the new Convenience Stapler Internal DC Harness.
2. Reconnect the stapler connector to the PWB.
3. Reinstall the bottom plate.
4. Connect the Convenience Stapler Harness to the Convenience Stapler.
5. Check the operation of the Convenience Stapler by removing the Staple Cartridge and
closing the Convenience Stapler Cover. The red LED should be illuminated.
1
Remove the screws (3).
2
Carefully separate the
bottom plate just enough
to access the connector
for the stapler.
3
Disconnect the stapler
connector from the
PWB.
1
Disconnect the
connectors.
2
Remove the harness