Xerox DocuColor 12/DCCS50, Service Manual

Page: 791 / 1617

1/05
6-111 DocuColor 12/DCCS50
dC330 Component Control
General Procedures
Reissue
010-030 HEAT ROLL LAMP Output ON: L
Automatically turns off after 1 sec.
NOTE: The fuser temperature con-
trol will be halted during the Diag.
Component Control and Diag. sub-
system check. The fuser tempera-
ture control continues in any other
Diag.
Processor
010-031 PRESSURE ROLL
LAMP
Output ON: L
Automatically turns off after 1 sec.
NOTE: The fuser temperature con-
trol will be halted during the Diag.
Component Control and Diag. sub-
system check. The fuser tempera-
ture control continues in any other
Diag.
Processor
010-032 WEB MOTOR Output ON: H Processor
010-033 OIL PUMP Output ON: H
Automatically turns off after 10 sec. Processor
010-040 EXIT MOTOR Output ON: L Processor
010-047 1ST BELT TRANSFER
ROLL
Output x Processor
010-050 DUPLEX OUT MOTOR Output ON: Port (L) Processor
010-060 FUSER INT FAN-LOW
SPEED
Output ON: H
NOTE: When you exit the I/O
check, exit at high speed.
Cannot run with Fuser INT Fan
High Speed (010-061) Processor
010-061 FUSER INT FAN-HIGH
SPEED
Output ON: L
NOTE: When you exit the I/O
check, exit at low speed.
Cannot run with Fuser INT Fan Low
Speed (010-060) Processor
010-085 OCT MOTOR
REVERSE
Output CCW (moves to the home position):
Port (H) Home detected.
Stop ON time: 600 msec
Cannot run with OCT Motor For-
ward (010-086)
Processor
010-086 OCT MOTOR FORE-
WARD
Output CW (moves to the offset position):
Port (H) Offset detected.
Stop ON time: 600 msec
Cannot run with OCT Motor
Reverse (010-085)
Processor
Table 2 Output Component Control Codes
ID Description In_Out Smart Help
Module_I
D
011-005 MAILBOX DRIVE
MOTOR
Output Starts / Stops the Paper Transport
Roll Sorter
011-010 DECURLER STEP-
PING MOTOR SPEED
60
Output Starts / Stops driving the Decurler
Transport Roll.
Speed: 60 mm / sec. Sorter
011-011 DECURLER STEP-
PING MOTOR SPEED
130 Output Starts / Stops driving the Decurler
Transport Roll.
Speed: 130 mm / sec. Sorter
011-012 DECURLER STEP-
PING MOTOR SPEED
220
Output Starts / Stops driving the Decurler
Transport Roll.
Speed: 220 mm / sec. Sorter
011-013 DECURLER STEP-
PING MOTOR SPEED
350
Output Starts / Stops driving the Decurler
Transport Roll.
Speed: 350 mm / sec.
Sorter
011-081 OCT GATE SOLENOID
OCT-ON
Output Must have the OCT Gate Solenoid
Bin Tray On (011-082).
Switch the OCT Gate to the OCT
direction. Return: OCT direction.
Time: 150 msec Sorter
011-082 OCT GATE SOLENOID
BIN TRAY-ON
Output Switch the OCT Gate to the Bin
Tray direction.
Suction: Bin tray direction.
Cannot run with OCT Gate Sole-
noid OCT ON. Sorter
011-083 BIN 2 GATE SOLE-
NOID
Output Switch the 2 Bin Gate to the Bin
Tray direction.
Cannot run with the 3 to 10 Bin
Gate Solenoids (011-084 through
011-091). Sorter
011-084 BIN 3 GATE SOLE-
NOID
Output Switch the 3 Bin Gate to the Bin
Tray direction.
Cannot run with the 2,4 to 10 Bin
Gate Solenoids (011-083, 011-085
through 011-091). Sorter
011-085 BIN 4 GATE SOLE-
NOID
Output Switch the 4 Bin Gate to the Bin
Tray direction.
Cannot run with the 2, 3, 5 to 10 Bin
Gate Solenoids (011-083, 011-084,
011-086 through 011-091). Sorter
Table 2 Output Component Control Codes
ID Description In_Out Smart Help
Module_I
D