Xerox DocuColor 12/DCCS50, Service Manual

Page: 839 / 1617

1/05
6-159 DocuColor 12/DCCS50
Change Tag Introduction, Processor (P) Tags
General Procedures
Reissue
Change Tag Introduction
Important modifications to the copier are identified by a tag number which is recorded on a tag
matrix label attached to the inside of the Front Fuser Cover, or inside the Front Door. This sec-
tion describes all of the tags associated with the copier, as well as multinational applicability,
classification codes, and permanent or temporary modification information.
Classification Codes
A tag number may be required to identify differences between parts that cannot be inter-
changed, or differences in diagnostic, repair, installation, or adjustment procedures.
A tag number may also be required to identify the presence of optional hardware, special non-
volatile memory programming, or whether mandatory modifications have been installed. Each
tag number is given a classification code to identify the type of change that the tag has made.
The classification codes and their descriptions are listed in the table below.
Processor (P) Tags
Processor Tags
TAG: P1
CLASS: N
USE: ALL
MFG SERIAL NUMBERS: FU2: 040199 FU0: 025021
FU3: 310512043x FU1: 310512691x
NAME: IBT Cleaner Assy.
PURPOSE:
KIT NUMBER:
N/A
REFERENCE: PL 7.1
TAG: P2
CLASS: N
USE: ALL
MFG SERIAL NUMBERS: FU2: 040199 FU0: 025021
FU3: 310512153x FU1: 310512691x
NAME: Rotary PWB/Plate Assy.
PURPOSE: Countermeasure for Rotary PWB short circuit problem
KIT NUMBER: N/A
REFERENCE: PL 6.1
TAG: P3
CLASS: N
USE: ALL
MFG SERIAL NUMBERS: FU2: 040321 FU0: 025022
FU3: 310512332x FU1: 310512707x
NAME: Aligner Baffle Assy.
PURPOSE: Duplex Aligner performance improvement
KIT NUMBER: N/A
REFERENCE: PL 2.18
Table 1
Classification Code Description
M Mandatory tag.
N Tag not installed in the field.
O Optional tag.
R Repair Tag.