manualshive.com logo in svg

Xerox DocuColor 12/DCCS50, Service Manual

The Xerox DocuColor 12/DCCS50 is a high-quality color printer perfect for any office or professional setting. Easily maintain and service your device with the comprehensive Service Manual available for free download at manualshive.com. Ensure optimal performance and longevity for your Xerox printer with this essential manual.

Share
Download
Page 511
background image

1/05

4-187

DocuColor 12/DCCS50

REP 19.1

Repairs and Adjustments

Reissue

REP 19.1 Removing the IDFE

Parts List on 

PL 19.1

 

Removal (Product Code GL2)

NOTE: 

There are two configurations of the IDFE for this machine. This REP applies generi-

cally to both. Where differences between the units exist, the applicable information is specified 
by the product code for the IDFE (GL2 or MFY).

Perform the following to remove the GL2 version of the IDFE:
1.

Print a Configuration Report (

GP 12 Printing Configuration Reports

).

CAUTION

If any of the following steps are not correctly followed, the IDFE will not shut down properly, 
and steps 2-3 of this procedure must be repeated.

2.

Switch OFF the Main Switch for the Printer/IDFE.

3.

Wait for 30 seconds.

NOTE: 

Allow 30 seconds to ensure complete shutdown of the Hard Disk Drive.

4.

Disconnect all network cables from the IDFE.

5.

Disconnect and remove the 2 DDI Cables from the IDFE to the Printer. 

6.

Disconnect the IDFE wiring harness from the Printer and the IDFE.

7.

Loosen the 4 mounting screws that secure the IDFE to the Printer.

8.

Remove the IDFE from the Printer.

9.

If necessary, remove the Token Ring PWB from the IDFE (

PL 19.1

)

10. If necessary, remove any additional memory from the IDFE (

REP 19.3

).

NOTE: 

The IDFE comes with 128 MB of memory installed. Customers may have addi-

tional memory kit(s) installed in the IDFE. Remove this memory for installation into the 
replacement IDFE.

Removal (Product Code MFY)

Perform the following to remove the MFY version of the IDFE:
1.

Print a Configuration Report (

GP 12 Printing Configuration Reports

).

CAUTION

If any of the following steps are not correctly followed, the IDFE will not shut down properly, 
and steps 2-3 of this procedure must be repeated.

2.

Switch OFF the Main Switch for the Printer/IDFE.

3.

Wait for 30 seconds.

NOTE: 

Allow 30 seconds to ensure complete shutdown of the Hard Disk Drive.

4.

Disconnect all network cables from the IDFE.

NOTE: 

The 2 DDI Cables removed in the next step will be used on the replacement IDFE.

5.

Disconnect and remove the 2 DDI Cables from the IDFE to the Printer. 

6.

Disconnect the IDFE wiring harness from the Printer and the IDFE.

7.

Loosen the 6 mounting screws that secure the IDFE to the Printer.

8.

Remove the IDFE from the Printer.

9.

If necessary, remove any additional memory from the IDFE (

REP 19.3

).

NOTE: 

The IDFE comes 128 MB of memory installed. Customers may have additional 

memory kit(s) installed in the IDFE. Remove this memory for installation into the replace-
ment IDFE.

Replacement (Product Code GL2)

Perform the following to replace the GL2 version of the IDFE:

1.

If necessary, reinstall the Token Ring PWB into the IDFE (

REP 19.2

).

2.

If necessary, reinstall the customer’s additional memory kit(s) into the IDFE (

REP 19.3

).

3.

If necessary, remove the IDFE Cover from the existing IDFE and install the Cover on the 
replacement IDFE. 

4.

Install the IDFE on the Printer.

5.

Tighten the 4 mounting screws that secure the IDFE to the Printer.

6.

Install the IDFE wiring harness between the IDFE and the Printer.

CAUTION

Do not cross the 2 DDI Cables.

7.

Connect the 2 DDI Cables between the IDFE and the Printer.

8.

Connect all network cables to the IDFE.

9.

Switch on the Main Power to the Printer.

10. Ask the customer to use the Configuration Report to verify that the printer connectivity 

settings are correct.

Replacement (Product Code MFY)

Perform the following to replace the MFY version of the IDFE:

1.

If necessary, install the customer’s additional memory kit(s) into the IDFE (

REP 19.3

).

2.

If necessary, remove the IDFE Cover from the existing IDFE and install the Cover on the 
replacement IDFE. 

3.

Install the IDFE on the Printer.

4.

Tighten the 6 mounting screws that secure the IDFE to the Printer.

5.

Install the IDFE wiring harness between the IDFE and the Printer.

CAUTION

Do not cross the 2 DDI Cables.

6.

Connect the 2 DDI Cables between the IDFE and the Printer.

7.

Connect all network cables to the IDFE.

8.

Switch on the power to the Printer.

9.

Ask the customer to use the Configuration Report to verify that the printer connectivity 
settings are correct.

Summary of Contents for DocuColor 12/DCCS50


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DocuColor 12/DCCS50

Dascom TALLY MIP480 User Manual preview
TALLY MIP480
Brand: Dascom Pages: 138
Dascom T2150 User Manual preview
T2150
Brand: Dascom Pages: 166
QMS Magicolor 2 plus Manual preview
Magicolor 2 plus
Brand: QMS Pages: 90
QMS Magicolor 2 Desklaser Quick Setup Manual preview
Magicolor 2 Desklaser
Brand: QMS Pages: 4
QMS 1725E Supplementary Manual preview
1725E
Brand: QMS Pages: 8
QMS 1725E Getting Started Manual preview
1725E
Brand: QMS Pages: 94
QMS 1660E Supplementary Manual preview
1660E
Brand: QMS Pages: 6
quadient DS-200iQ User Manual preview
DS-200iQ
Brand: quadient Pages: 130
TE Connectivity T3212 Quick Start Manual preview
T3212
Brand: TE Connectivity Pages: 2
TE Connectivity T3200 Replacement Instructions preview
T3200
Brand: TE Connectivity Pages: 2
Kyocera FS-C8008N Operation Manual preview
FS-C8008N
Brand: Kyocera Pages: 157
Star SM-S301 Hardware Manual preview
SM-S301
Brand: Star Pages: 24
Magtek ExpressCard 500 User Manual preview
ExpressCard 500
Brand: Magtek Pages: 49
Canon Pixma iP2820 Getting Started preview
Pixma iP2820
Brand: Canon Pages: 2
Canon PIXMA IP2500 Series Quick Start Manual preview
PIXMA IP2500 Series
Brand: Canon Pages: 2
Canon PIXMA iP2810 Online Manual preview
PIXMA iP2810
Brand: Canon Pages: 246
Canon PIXMA IX5000 Specifications preview
PIXMA IX5000
Brand: Canon Pages: 2
Canon PIXMA IP8700 Series Manual preview
PIXMA IP8700 Series
Brand: Canon Pages: 4

Brands by name

Popular brands

Load more brands