Xblue Networks 45P, Installation & Maintenance Manual

Page: 112 / 241

Telephone Operation
112
XBLUE Networks
Vo
ic
e Call
R
ecor
der
(One T
ouc
h R
ecor
d)
5
5.
If a Flexible Feature Button has been programmed with the Intercom Mode Selection
Code
Feature
98
the LED associated to that button will indicate the current mode
selection as follows:
Voice Call Recorder (One Touch Record)
Feature
67
The Voice Call Recorder (Once Touch Record) function requires the digitally integrated
Voice Mail system. This feature allows users to record external (CO Line) conversations.
When the Voice Recorder is activated, a connection is established between the extension
and the Voice Mail system. The conversation is recorded in the extension’s voice mailbox
and stored in the “Clip Board” area.
Note:
Requires the integrated Voice Mail System
Conditions
1.
The feature may programmed on a Flexible Feature button.
2.
If a Flexible Feature Button is used for this feature... During recorder setup the associ-
ated LED (lamp) for that button will light steady. When the recording begins the lamp
will change color but it will remain lit solid.
3.
Extensions programmed into the Automatic Record Group, will not begin recording until
Call Duration Timer has expired.
4.
Placing a call on hold constitutes completing a call and ends the recording function.
Therefore, the feature code saving the recording must be dialed before placing the call
on hold.
Voice Call - Hands Free LED will light steady
Tone Ringing Mode LED will Flash
Related Features Related Programming
Recorder Button (One Touch Record) -
(F
67
)
Control
Automatic Record Member 6-3-2