Resource
172
XBLUE Networks
Securi
ty
Alarm
Action
6.4
•
Secure Password – Password used to reset the alert condition.
Data Range (Default Range in Bold)
Utility: Door Lock, Secure
SC. Password: 0000, 0001 ~ 9999
Press
show
Input the sensor # to adjust (1, 2, 3 or 4), then press
show
Use
back
and
next
to select the option to be programmed.
Press
chg
to select
Security
Alarm
Action
MBC - 4-30
For each of the four sensor contacts on the Option Board, a trigger of any of the sensors
will cause action to be taken based on the programming in this category. Action here will
occur only when the alert condition has not been reset (actual alarm condition exists).
Alert Mode can be set to one of three actions:
•
Ring all extensions.
•
Make a voice announcement to all extensions (requires the optional voice
mail)
•
N (No additional action)
An additional action
OutCall
may be programmed to place an outgoing call using these
parameters:
•
Outgoing Phone Number to call
•
MSG Launch (requires the optional voice mail)
•
Out Call Duration
•
Out Call tries
The programming parameters are:
Summary of Contents for 45P
