Xblue Networks 45P, Installation & Maintenance Manual, Page: 56 / 241

Telephone Operation
56
XBLUE Networks
Call
F
orw
ar
d
Extension
5
Call Forward Extension
Feature
2
There are several call forward options to choice from; each extension user can customize
their own call forwarding.
•
“Idle” Forward all calls,
•
“Busy” Forward calls only when the extension is busy.
•
“Follow Me” Use the follow me feature to receive calls at a temporary loca-
tion and activate the feature remotely from another extension.
•
“No Answer” Forward calls that go unanswered at an extension.
•
“External” Forward incoming calls to another location or different telephone
number. (This feature must be enabled for your extension in database
administration.)
Forward conditions may be set as follows for each call forward type:
•
Intercom calls only.
•
Intercom and CO Line (including transferred CO Lines) calls.
•
CO Line calls only.
Conditions:
1.
Intercom calls to a forwarded extension will receive a special tone signifying that the
extension called is forwarded.
2.
The Auxiliary Lamp will not light in call forward mode if it has been disabled by the
attendant in Attendant Administration.
3.
If any of the Call Forward features are programmed on a flexible button, the LED asso-
ciated with that button will light indicating that call forward is active.
4.
External call forward is programmed in Attendant Administration programming, allowing
one inbound CO Line to forward to a preprogrammed, outbound CO Line.
Associated Features Associated Programming
Do Not Disturb (F
4
)
Call Forward (F
2
)
Message Waiting (F
96
)
Forced Intercom Tone Ring (
*
)
Intercom Mode Selection (F
98
)
Extension
Receive Assignment 1-SN-05
Predefined CFW 1-SN-21
ECF Allow 1-SN-22