Xblue Networks 45P, Installation & Maintenance Manual, Page: 62 / 241

Telephone Operation
62
XBLUE Networks
D
ata R
ate
5
Data Rate
Feature
75
The Data Rate setting is used with extension 55, and should not be changed.
Day and Night Modes
Feature
63
The system can be programmed to follow a seven day, twenty-four hour time schedule that
will automatically switch the system from Day to Night modes. These modes will affect the
incoming call ringing assignment by sending them to their programmed day or night desti-
nations. In addition, the Attendant can change the system manually from Day to Night
mode. Doing so will leave the system in that mode until it is manually changed. The Fea-
ture code ( Feature
63
) is used to toggle between these modes.
Conditions:
1.
At default, no CO Lines (CO Lines) are programmed to ring an extension.
2.
The system operation Mode must be set to “Time Mode” for the system to automatically
switch from day to night mode ringing.
3.
When programming Time Service Mode switching, the input time represents the time of
day that the service mode will change to the associated Service Mode.
Associated Features Associated Programming
N/A N/A
Associated Features Associated Programming
Attendant Administration (F
#0
)
Night Service Mode (F
63
)
Extension Ring Assignment 1-SN-06
Hunt Group Answer 2-LN-03
Resource - Time Switching 4-07
CO Line Class of Service 2-LN-01/02
Extension Class of Service 2-LN-01/02