• • • • • • • • • • • • • • •
• •
• • • • • • • • • • • • • • • •
• • •
• •
•
4
6
7
9
8
5
Installing Your Vista 200 Phone
Wall Mount
Wall Mount
Connect the receiver and receiver
cord .
Attach the wedge-shaped base in
desk mount or wall mount
†
position.
Connect the line cord
.
Connect the power adaptor
.
Attach the language faceplate.
Attach the receiver card and lens
(shiny-side down).
Attach the memory key card and
lens (after saving numbers and
names in memory). The lens snaps
on and off so you can add numbers.
When you have power:
When you plug in your new phone, you may see a message on the display ask-
ing you to make a language selection. Read the directions on the display to
select one of two languages.
Vista 200 also runs a test to ensure that the phone cords are connected properly. If
the test fails, the display will prompt you to check the phone cords. Make sure
all connections are fastened securely.
Fit the Discovery Card on the phone.
To find the
OPTIONS
key, slide the panel.
3
1
†
For wall mounting, we recommend
that you use a wall mounting plate,
which your local telephone company
can install. The excess line cord fits
into the stand of the phone.
Desk Mount
2
1
