8-S57
ME8200, ME9000, WSM
HYDRAULIC SYSTEM
Clearance between Hydraulic Arm Shaft and Bushing
1. Measure the hydraulic arm shaft O.D. with an outside
micrometer.
2. Measure the bushing I.D. with a cylinder gauge, and calculate the
clearance.
3. If the clearance exceeds the allowable limit, replace the bushing.
(When reassembling)
• When press-fitting a new bushing with a press-fitting tool (see
page G-59), observe the dimensions described in the figure.
• When press-fitting a new bushing, apply transmission fluid to the
hydraulic cylinder liner boss and bushing.
• When press-fitting a new bushing, press-fit it so that each seam
faces up.
W1026937
Clearance between
hydraulic arm shaft and
bushing (Right side)
Factory spec.
0.140 to 0.250 mm
0.00551 to 0.00984 in.
Allowable limit
0.50 mm
0.0197 in.
Hydraulic arm shaft O.D.
(Right side)
Factory spec.
59.970 to 60.000 mm
2.36102 to 2.36220 in.
Bushing I.D. (After
press-fitted) (Right side)
Factory spec.
60.140 to 60.220 mm
3.36772 to 2.37087 in.
Clearance between
hydraulic arm shaft and
bushing (Left side)
Factory spec.
0.140 to 0.250 mm
0.00551 to 0.00984 in.
Allowable limit
0.50 mm
0.0197 in.
Hydraulic arm shaft O.D.
(Left side)
Factory spec.
64.970 to 65.000 mm
2.55787 to 2.55906 in.
Bushing I.D. (After
press-fitted) (Left side)
Factory spec.
65.140 to 65.220 mm
2.56457 to 2.56772 in.
Press-fit location of
bushing (A)
Factory spec.
13.5 to 14.5 mm
0.5315 to 0.5709 in.
Press-fit location of
bushing (B)
Factory spec.
17.5 to 18.5 mm
0.6890 to 0.7283 in.
(1) Collar (Left)
(2) O-ring
(3) Bushing (Left)
(4) Bushing (Right)
(5) O-ring
(6) Collar (Right)
(a) Right Side
* Flush the end of collar with the
end of hydrualic cylinder body.
KiSC issued 03, 2007 A
Summary of Contents for ME8200
