3-S42
ME8200, ME9000, WSM
TRANSMISSION
PTO Gear Case Assembly
1. Remove the PTO gear case and PTO drive shaft as a unit.
(When reassembling)
• Apply liquid gasket (Three Bond 1216 or equivalent) to joint face
of the PTO gear case and transmission case.
W1067481
Disassembling PTO Gear Case
1. Remove the PTO case cover mounting screws and then remove
the PTO gear case cover (6).
2. Remove the stake of the staking nut (8), and then remove it.
3. Remove the bearing (7) by using the bearing puller.
4. Tap out the PTO shaft to the rear side.
5. Remove the gears (11), (14), thrust collars (9), (17), inner rings
(10), (15), hub (13) and shifter (12).
6. Pull out the PTO drive shaft (1) as a unit.
7. Remove the PTO shift fork parts and PTO shift lever parts.
(When reassembling)
• Reinstall the reamer screw at correct position to mount the PTO
cover case.
• Direct the grooves of thrust collars (9), (17) to the inner rings (10),
(15) sides.
• Replace the PTO shaft staking nut (8) with new one, and stake it
firmly after tightening.
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) to
the inner rings (10) and (15).
• Apply grease to the oil seal (19) and O-ring.
W1149828
Tightening torque
PTO gear case assembly
mounting screw
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
Tightening torque
PTO shaft staking nut
225.6 to 264.8 N·m
23 to 27 kgf·m
166.4 to 195.3 lbf·ft
PTO gear case cover
mounting screws and
reamer screw
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(1) PTO Drive Shaft
(2) Ball Bearing
(3) Gear
(4) Gear
(5) Ball Bearing
(6) PTO Gear Case Cover
(7) Ball Bearing
(8) Stake Nut
(9) Thrust Collar
(10) Inner Ring
(11) Gear
(12) Shifter
(13) Hub
(14) Gear
(15) Inner Ring
(16) Internal Snap Ring
(17) Thrust Collar
(18) Ball Bearing
(19) Oil Seal
(20) PTO Shaft
KiSC issued 03, 2007 A
Summary of Contents for ME8200
