wsm ME8200, Workshop Manual

Page: 60 / 543

G-41
ME8200, ME9000, WSM G GENERAL
Nozzle Tester
Code No.: 07909-31361
Application: Use to check the fuel injection pressure and spray
pattern of nozzle.
Measuring: 0 to 50 MPa
range (0 to 500 kgf/cm
2
, 0 to 7000 psi)
W10246530
Plastigage
Code No.: 07909-30241
Application: Use to check the oil clearance between crankshaft and
bearing, etc.
Measuring: Green .... 0.025 to 0.076 mm (0.001 to 0.003 in.)
range
Red ....... 0.051 to 0.152 mm (0.002 to 0.006 in.)
Blue ....... 0.102 to 0.229 mm (0.004 to 0.009 in.)
W10247190
Red Check
Code No.: 07909-31371
Application: Use to check cracks on cylinder head, cylinder block,
etc.
W10249090
NOTE
■
• The following special tools are not provided, so make them referring to the figure.
Bushing Replacing Tool
Application: Use to press out and to press fit the bushing.
1. For small end bushing
W1025500
A 196 mm (7.7165 in.)
B 37.5 mm (1.476 in.)
C 150 mm (5.9055 in.)
D 45.95 mm dia. (1.7697 in. dia.)
E 48.100 to 48.075 mm dia. (1.8937 to 1.8927 in. dia.)
F 20 mm (0.7874 in.)
a 6.3
μ
m (250
μ
in.)
b 6.3
μ
m (250
μ
in.)
KiSC issued 03, 2007 A