9-S33
ME8200, ME9000, WSM
ELECTRICAL SYSTEM
Hazard Unit
1. Remove the instrument panel.
2. Measure the voltage with a voltmeter across the GB terminal (6)
and chassis.
3. If the voltage differ from the battery voltage, the wiring harness is
faulty.
(Reference)
W1040574
(B) Brake Switch
Brake Switch
1) Wiring Harness
1. Disconnect the leads from the brake switch (1).
2. Connect the wiring harness lead terminals to each other and turn
the main switch on.
3. If the stop lights do not light, the fuse, wiring harness or bulb is
faulty.
2) Brake Switch Continuity
1. Remove the brake switch (1).
2. Check the continuity with an ohmmeter across the switch
terminals.
3. If it does not conduct or any value is indicated when the switch is
pulled, the switch is faulty.
4. If infinity is not indicated when the switch is released, the switch
is faulty.
W1050616
Voltage
GB terminal - chassis
Approx. battery voltage
1
–
Vacancy
2
0.85GB
Ground
3
0.5Y
Trailer Indicator
4
0.85RY
Turn Signal RH (Output)
5
0.85RW
Battery Voltage (AC)
6
0.85GB
Battery Voltage
7
0.85RB
Turn Signal LH (Output)
8
–
Vacancy
9
0.85LR
Turn Signal RH (Input)
10
–
Vacancy
11
–
Vacancy
12
0.85WL
Turn Signal LH (Input)
13
0.85L
Hazard Switch
A : Hazard Unit
Resistance
(Across switch
terminals)
Reference
value
When switch is pulled
Infinity
When switch is released
0
Ω
(1) Brake Switch
KiSC issued 03, 2007 A
Summary of Contents for ME8200
