wsm ME8200, Workshop Manual

Page: 227 / 543

3-S7
ME8200, ME9000, WSM TRANSMISSION
Hydraulic Pipe and Fuel Pipe
1. Remove the accelerator rod (3).
2. Remove the suction pipe (1).
3. Remove the delivery pipe (2) for 3-point hydraulic system.
4. Remove the main delivery pipe (8) and return pipe (6) for the
steering controller.
5. Disconnect the PTO pipe (5).
6. Disconnect the fuel pipe (7) from the filter.
7. Disconnect the fuel over-flow pipe (4).
(When reassembling)
W1013219
Wire Harness R.H.
1. Disconnect the wiring lead (2) for solenoid valve.
2. Disconnect the wiring lead (1) for glow plug.
3. Disconnect the 1P connector (3) for coolant thermo sensor.
4. Disconnect the 2P connector (5) for power steering oil sensor.
W1013665
Tightening torque
Main delivery pipe and
return pipe retaining nut
47.1 to 51.0 N·m
4.8 to 5.2 kgf·m
34.7 to 37.6 lbf·ft
(1) Suction Pipe
(2) Delivery Pipe
(3) Accelerator Rod
(4) Fuel Overflow Pipe
(5) PTO Pipe (6) Return Pipe for Steering Controller
(7) Fuel Pipe
(8) Main Delivery Pipe for Steering
Controller
(1) Wiring Lead for Glow Plug
(2) Wiring Lead for Solenoid valve
(3) 1P Connector (4) Bonnet Support
(5) 2P Connector
KiSC issued 03, 2007 A