wsm ME8200, Workshop Manual

Page: 532 / 543

10-S41
ME8200, ME9000, WSM CABIN
Air Mixing Door Control Cable (Blue Cable)
1. Disconnect the air mixing door control cable (3) from the damper
lever (1) of air conditioner control panel side.
(When reassembling)
• Set the damper lever (1) of the air conditioner unit at MAX HOT
position. Reconnect the cable.
• Move the control to MAX HOT position. Fit the inner cable in
position, and press the fix the outer cable by the cable clip (2) in
the direction of arrow (A) as shown at left.
• Move the temperature control lever several times, and finally set
it to MAX HOT position to make sure the damper lever is at HOT
position too.
W1030814
A/C Mode Door Control Cable (Yellow Cable)
1. Disconnect the air conditioner mode door control cable (3) from
the def. control lever (1) of A/C control panel side.
(When reassembling)
• Set the air conditioner unit to DEF mode position and reconnect
the cable (3).
• Set the control at DEF position. Fit the inner cable in position,
and press and fix the outer cable by the cable clip (2) in the
direction of arrow (B) as shown at left.
• Move the mode lever several times and finally set it to DEF
position to make sure the air conditioner unit is at DEF mode
position.
• Lay and fix the mode door control cable over the water valve
cable.
W1030982
(1) Damper Lever
(2) Cable Clip
(3) Air Mixing Door Control Cable A : Direction of Pulling Outer Cable
(1) DEF. Control Lever
(2) Cable Clip
(3) Mode Door Control Cable B : Direction of Pushing Outer Cable
KiSC issued 03, 2007 A