wsm ME8200, Workshop Manual

Page: 175 / 543

1-S73
ME8200, ME9000, WSM ENGINE
Compressor Side
1. Check the inlet pipe 1 (1) of the compressor cover (2) to see if
there is no air leak.
2. Check for loose connections or cracks in the suction side of the
intake pipe.
3. If any air leak is found, change the clamp (3) and or inlet pipes.
W1045061
Wheel Shaft
1. Remove the intake pipe (1) and flange (2).
2. Turn the compressor wheel gently with a finger and check for
contact.
3. If the wheel does not turn smoothly and / or found the damage,
and abnormal sound, check the axial and radial clearance.
4. If the compressor / turbine wheel and housing is found to be
damaged, replace the turbocharger assembly with new one.
W1045310
Axial Clearance
1. Set the dial gauge.
2. Move the shaft in the axial direction, and measure the end play.
3. If the end play (A) exceeds 0.12 mm (0.0047 in.), replace the
turbocharger assembly with new one.
W1045495
(1) Inlet Pipe 1
(2) Compressor Cover (3) Clamp
(1) Inlet Pipe (2) Flange
KiSC issued 03, 2007 A