33
CleanFire Owners Manual
2016
Maintenance
To replace the seals from the top and bottom doors
on the heat exchanger, locate the joint of the rope and
start to remove one end by simply pulling the rope out
of the channel on the door. Scrape out any old caulking
and clean any debris from the channel once the rope is
removed.
Start the new rope in the same location as the old one
and press the rope into the channel on the door. Clean
the sealing surface on the heat exchanger before replac-
ing the door.
Once the debris is cleaned, lay a small bead of silicone in
the corner of the dorr as shown. the Silicone must remain
behind the rope, so use the smallest amount needed to
hold the rope in place.
