26
CleanFire Owners Manual
2016
Slide each turbulator up and down to loosen. Use a twist-
ing motion to clean the transfer tubs. Remove and clean
each turbulator. Take care not to damage the insulation
and the sensors on the side of the box.
Vacuum all ash from the tube box, including the door
and any remaining ash in the heat transfer tubes.
Make sure the turbulators are in place and close the
top door when cleaning is complete. Reconnect the
draft fan wires and the chimney coupling.
Lift the lid off and back, taking care not to damage the
draft fan wires. Set the lid aside where it will not be dam-
aged.
Maintenance
