29
CleanFire Owners Manual
2016
Remove the heat exchanger lid as previously described.
Remove the cap screws that secure the catalyst housing
lid in place and carefully remove the lid, taking care not
to damage the seal or drop any debris onto the catalyst.
Carefully remove the insulation pieces from the catalyst
housing. Inspect for cracks or damage and replace if
needed.
Catalyst Replacement
If the catalyst cannot reach and maintain a temperature above 700o F, and if the boiler is not maintaining normal
heat ouput, the catalyst may be failed and in need of replacement. To access the catalyst, remove the heat exchang-
er top lid as described previously in this manual. See the warranty section to determine if your catalyst is covered
under warranty. Do not attempt to burn the CleanFire without a working catalyst, as this will cause the heat ex-
changer to plug and will greatly reduce the heat output of the unit. Burning the CleanFire without a catalyst will
void the boiler warranty.
Maintenance
