www.wobit.com.pl
User manual SID116 – 09.04.2015r. v.1.0 page 16
4.
SID116 – PC software
4.1
USB connection with PC
Driver configuration and programming is made using SID116-PC application. Driver should be connected with PC
using USB cable A – B mini type. After connection to computer please turn on driver power supply and run
SID116 – PC program. Correct communication will be signalized by information at top program window.
CAUTION!
1)
USB connection should be made always before turning on driver power supply.
2)
USB connection is consistent to noises at supply line and to electromagnetic noises existing at
industrial conditions. While occurring communication problems please use additional protecting
elements like:
use line filters,
use high quality USB cable, <1,5 m length equipped with ferrite beads,
use opt insulated USB HUBs at PC side.
At higher noises can occur that communication will be impossible.
4.2
Application interface description
4.2.1
Main application window
Picture. 17. Main application window
1)
Toolbar.
2)
Info about device
3)
Driver current operation status
4)
Tab allowing selection fo current Modbus
register.
5)
Communication status with PC
6)
Settings Record / Read
7)
Control intefrace selection tab
8)
Regulation mode selection and setting edition
tab
9)
Current interface state and configuration tab
10)
Driver I/O preview
11)
Control signals preview
12)
Advanced settings
