English
78
WILO SE 05/2010
BMS remote operation
5.3.0.0
IN1 (sensor input)
Settings for sensor input 1
Not displayed in the manual
control mode (incl. all sub-
menus)
5.3.1.0
IN1 (sensor value
range)
Display of sensor value range 1
Not displayed with PID
control
5.3.2.0
IN1 (value range)
Setting of the value range
Possible values: 0...10 V/2...10 V/
0...20 mA/4...20 mA
5.4.0.0
IN2
Setting for external setpoint
input 2
5.4.1.0
IN2 active/inactive
ON
External setpoint input 2 active
OFF
External setpoint input 2
inactive
5.4.2.0
IN2 (value range)
Setting of the value range
Possible values: 0...10 V/
2...10 V/0...20 mA/4...20 mA
Not displayed when
IN2 = inactive
5.5.0.0
PID parameters
Settings for PID control
Only displayed when PID
control is active (incl. all sub-
menus)
5.5.1.0
P parameter
Setting of the proportional term
of the control
5.5.2.0
I parameter
Setting of the integral term of
the control
5.5.3.0
D parameter
Setting of the derivative term of
the control
5.6.0.0
Error
Settings for behaviour in case of
error
5.6.1.0
HV/AC
HV “heating” mode
AC “cooling/air-conditioning”
mode
5.6.2.0
Emergency
operation speed
Display of emergency operation
speed
5.6.3.0
Auto reset time
Time until automatic acknowl-
edgement of an error
5.7.0.0
Other settings
5.7.1.0
Display orientation
Display orientation
Display orientation
5.7.2.0
Pressure value
correction
When pressure value correction
is enabled, the differential pres-
sure deviation measured by the
differential pressure sensor that
is factory-fitted on the pump
flange is taken into account and
corrected.
Only displayed in p-c mode
Pressure value correction Off
No.
Designation
Type
Symbol Values/explanations
Display conditions
±
±
±
±
±
±
±
±
±
±