English
Installation and operating instructions Wilo-VeroLine IP-E, Wilo-VeroTwin DP-E
71
8.6.2
Changing to menu mode
To change to menu mode, proceed as follows:
• While the display is showing the status page, press the red button for
2 seconds (except in case of an error).
Standard behaviour:
The display changes to menu mode. Menu number <2.0.0.0> is dis-
played (Fig. 27).
Service mode:
If service mode is activated via DIP switch 1 menu number <5.0.0.0>
is displayed first (Fig. 28).
Error case
:
In case of error, menu number <6.0.0.0> is displayed (Fig. 29).
8.6.3
Navigation
• Change to menu mode (see 8.6.2 “Changing to menu mode” on
page 71).
Carry out general menu navigation as follows (for an example,
see Fig. 30):
During navigation, the menu number flashes.
• To select the menu element, turn the red button.
The menu number is incremented up or down. The symbol associated
with the menu element and the setpoint or actual value are shown, if
applicable.
• If the downward pointing arrow for “One level down” is shown, press
the red button to change to the next level down. On the display, the
new menu level is indicated by the menu number, for example,
<4.4.0.0> changes to <4.4.1.0>.
The symbol for the menu element and/or the current value (setpoint,
actual value or selection) is shown.
• To return to the next higher menu level, select the “One level up”
menu element and press the red button.
On the display, the new menu level is indicated by the menu number,
for example, <4.4.0.0> changes to <4.4.1.0>.
NOTE
If the red button is pressed for two seconds while a “One level up”
menu element is selected, the display jumps back to the status page.
2 s
Fig. 27: Standard menu mode
2.0.0.0
±
2 s
ON
1
12.3
Fig. 28: Service menu mode
5.0.0.0
±
2 s
ON
1
12.3
Fig. 29: Error case menu mode
6.0.0.0
±
E000
Fig. 30: Navigation example
4.1.0.0
4.0.0.0
5.0.0.0
4.4.0.0
4.4.3.0
1.0.0.0
2.0.0.0
4.2.0.0
4.4.1.0
±
±
2 s
