Wersi Abacus User Manual Download Page 8

Page: 8 / 96

Overview

The Right Control Panel

The push buttons on the right control panel are assigned to the following groups: PERCUSSION, ENSEMBLE,

BRASS, TRADITIONAL, SYNTHESIZER and PEDAL. They are used to select sounds and are linked with ‘virtual but

tons’ on the TFT display. Another group of push buttons allows the control of the Tonewheel sounds (ORGAN)

Data / Tempo Wheel

To the right of the TFT display, you will also find the data wheel (Tempo / Data) for setting the

Rhythm tempo, and for changing various parameters described in the following sections of this

manual.

Drawbars (Tonewheel Upper / Lower)

Below the right control panel are the drawbars for setting the Tone Wheel sounds. The right group (Tonewheel Lower

Manual), determine the sound for the Lower Manual, whilst the left group (Tonewheel Upper Manual) determine the

sound for the Upper Manual.

Tonewheel Upper Manual Tonewheel Lower Manual

Summary of Contents for Abacus

































































































Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands

Wersi Abacus, User Manual

Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands