Wersi Abacus User Manual Download

Page: 61 / 96

To open the Mixer Preset Drop Down Menu, simply press the ‘Downward Pointing Arrow. The list of Mixer Presets

will now be displayed. To select one of the Mixer Presets, just press on the name of the Mixer Preset. The Mixer will

instantly be setup.

The different Input sources:

There are six virtual mixer sliders with a VU meter assigned to each of them:

Organ

- This section adjusts the instrument voice volume (General Volume). The virtual slider adjusts the sounds

generated by the keyboard manuals, the pedals and accompaniments.

Micro 1 and Mirco 2

- These controls adjust the volume of the two microphones that can be connected to the two

microphone inputs. These controls work ‘in parallel’ to the two microphone physical volume controls located on the

control panel. When you turn the ‘physical’ controls, the virtual sliders will also be adjusted too.

Audio 1 and Audio 2

- These controls adjust the volumes of the two audio inputs.

Digital

- This control adjusts the volume of digital audio signals that are fed into the (optional) SP-DIF input. This

also control / adjusts the volume of sound sources generates by the Windows operating system and the CD-Player.

Sounds from the ASIO drivers can also be routed through the OpenArt-System through this input (Such as VST instru

ments).

Summary of Contents for Abacus

































































































Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands

Wersi Abacus, User Manual

Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands