Wersi Abacus User Manual Download

Page: 40 / 96

16.1 Basic Settings

The following ‘basic’ settings can be made for each manual (and saved
into every Total Preset).

•

On / Off -

Turns the sound of each Selector on and off. When the box

is ticked, the Sound is ‘on’.

•

Volume

- Adjust the volume for each Sound / Selector (per each

manual and pedal).

•

Reverb 1

- Adjust the WERSI Reverb 1 intensity for each Sound /

Selector.

•

Reverb 2

- Adjust the WERSI Reverb 2 intensity for each Sound /

Selector.

•

Chorus

- Adjust the intensity of the Chorus effect for each Sound /

Selector.

•

Delay

- Adjust the intensity of the Delay (Echo) effect for each Sound

/ Selector.

•

Octave

- Allows you to manually set the octave b2 and -2

octaves for each Selector.

•

Panorama

- Here you can adjust the panorama for the related man

ual. A value of 0 means you hear the sound assigned to this manual

only from the left speaker. A value of 127 means that you only hear

the sound from the right speaker, whereas with the value of 64 means

you hear the sound equally from both left and right speakers. So the

lower the value of the Panorama, the more to the left the sound is. The

higher the value, the more the sound is to the right. This allows you

to really create a big space with your sounds. This is especially good

for re-creating orchestral, big band, brass band and general band like

sounds.

•

Mono (Pedal Only)

- A special function only for the Pedals. Switch

between Monophonic and Polyphonic.

16.2 WERSI-Chord

Here you select the different WERSI-Chord types for harmonising music

that you play.

WERSI Chord types:

•

4-Way Close 1 Harmony

•

4-Way Close 2 Harmony

•

BB Brass (BigBand Brass) Harmony

•

BB-Reeds (BigBand Reeds) Harmony

•

Big Band Harmony

•

Block Chord Harmony

•

Country Harmony

•

Duet 1 Harmony

•

Duet 2 Harmony

•

Fanfare Harmony

•

Fingered Harmony

•

Hymn Harmony

•

Normal Harmony

•

Solo-Voice

•

Theatre Harmony

Summary of Contents for Abacus

































































































Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands

Wersi Abacus, User Manual

Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands