Wersi Abacus User Manual Download Page 50

Page: 50 / 96

PLEASE NOTE: If you want to save all of the Sub-Presets as ‘Standard’.

Simply press the ‘Standard Button.

The following Message will appear on the screen:

Press the ‘Yes’ button to change the ‘Standard’ settings.

(Selecting ‘No’ will abort this function).

If you have pressed the ‘Yes’ button, the red background

will appear as a ‘last warning that the changes will take

place.

(Change any of the Selector Settings, Press the Advanced

buttons and Sub-Preset buttons to make changes here.

Press the ‘Standard’ button again to save the changes.

PLEASE NOTE: Please bear in mind that changes you make in the Standard Preset mode affects all of your

Total Presets.

However, if you wish to return to the Factory-Preset settings, touch the ‘Set Std’ button.

Summary of Contents for Abacus

































































































Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands

Wersi Abacus, User Manual

Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands