Wersi Abacus User Manual Download Page 73

Page: 73 / 96

20. The Output Mixer

While the previously described input mixer allows controlling volumes and effect settings of the different signal sourc

es, the Output Mixer is used to adjust the sum signal parameters for the three output channels.

The three Output Channels are: Main (Main Master Output), Group 1 (Audio Line Outputs 1 - Stereo Jacks) and

Group 2 (Audio Line Outputs 2 - Stereo Jacks).

Touch the ‘Output’ button in the menu bar at the top of the screen to open the window below:

The Output Mixer is very similar to the Input Mixer. There are three Channel strips for the three different outputs.

Each Channel has an ‘Edit’ button that allows you to open an additional settings window, where settings can be ad

justed.

The top of the Output Mixer window contains the Output Mixer Preset Drop Down Menu, Reset, Delete and Save but

tons. The functions of these buttons work in exactly the same way as previously described for the Input Mixer.

The Output Mixer Preset

List shows all available Out-

put Presets.

Summary of Contents for Abacus

































































































Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands

Wersi Abacus, User Manual

Search results

Summary of Contents for Abacus

Reviews:

Related manuals for Abacus

Brands by name

Popular brands