3. Installation
Page 16
105466
– TW-31-E - V1.9 - 06.04.2021
3.
Installation
3.1 Location and climatic conditions
The tank monitor is designed for the use in closed rooms. It must not be installed
and operated outdoors.
It is essential not to install the device under the following conditions:
- severe jolting, vibration or magnetic fields
- permanent contact with water
- relative humidity of more than 75%
- sharply fluctuating temperatures (condensation)
- permanent and direct UV radiation
- dust, flammable gases, vapours, solvents,
- operation in an aggressive atmosphere (ammonia or sulphur fumes) - risk of
oxidation
- operation in the immediate vicinity of radio transmitters with high levels of
spurious radiation.
A physical separation between the device and inductive consumers is recom-
mended.
3.2 Unpacking and storage
If the packaging is damaged or something is missing, do not fit the temperature con-
troller. In this case please contact Welba.
If you keep the temperature controller for a period before using it, store it in a clean
dry place at a temperature of between -20°C and +70°C.
