7. Setting of parameters
105466
– TW-31-E - V1.9 - 06.04.2021
Page 43
to section 7.2:
Change and save parameter values
Display parameter value:
Use the arrow keys to select the desired parameter.
Press the "SET" button: The parameter value is displayed.
Change parameter value:
Use the arrow keys to select the desired parameter.
Hold down the "SET" button and use the arrow buttons to set the desired value.
(If the arrow buttons are held, the value starts to run)
Note:
In order to store the value in the memory, first release the arrow button and then
the "SET" button.
Return to working level:
(possible from any parameter)
Standard with saving the values:
Press both arrow buttons simultaneously. The display shows "Stor" for a short
time - changes are accepted.
The control switches to the operation mode - the display shows the current time..
Return without saving the values:
If the OFF key is pressed - or
If no button is pressed for 60 seconds:
The controller automatically returns to the operation mode.
All changes are lost.
NOTICE
