HPSA-7100-R Series Installation and User Manual
61
P/N P01- 04946 Rev C
Powering Up the HPSA-7100-R
7.1.0.1
Trouble LED Descriptions
If any of the Trouble LEDs are illuminated on the Audio and Monitoring Bridge, the
HPSA-7100-R requires attention. The table below describes the meaning of each Trouble
LED. Refer to Table 7.1 and Figure 7.2 for Audio and Monitoring Bridge LED
descriptions and locations.
THE AC POWER BUTTON DOES NOT ILLUMINATED WHEN AC POWER
IS PRESENT WITHIN THE CABINET. USE AN AC VOLTMETER TO
VERIFY THE PRESENCE OR ABSENCE OF AC POWER AT THE AC
INPUT TERMINAL BLOCK OF THE HPSA.
TABLE 7.1
AMB Trouble LED Descriptions
Trouble
Description
AC
If the
AC
LED is illuminated, the unit does not have AC power applied;
is running on battery power. (D10)
No Batt
(No
Battery)
The No Battery trouble LED activates if the battery voltage is less than
approximately 16 VDC. The No Battery trouble LED deactivates if the
battery voltage is greater than approximately 16 VDC. If the
No Batt
LED is illuminated, the batteries are depleted or disconnected; however,
AC power is present. For more information, please refer to Section 10.3,
Low Batt
(Low
Battery)
The Low Battery trouble activates if the battery voltage is less than
approximately 46 - 46.5 VDC. The Low Battery trouble deactivates if
the battery voltage is greater than approximately 46 - 46.5 VDC. Addi-
tionally, the Low Battery trouble deactivates when the No Battery trou-
ble is active. (D12)
Tamper
If the
Tamper
LED is illuminated, the electronics cabinet door is open.
(D13)
Amps
If the
Amps
LED is illuminated, there is a Trouble in the Amplifier cir-
cuit. See Table 7.5 for additional information. (D14)
Dvrs
If the
Dvrs
LED is illuminated, there is a Trouble in the driver circuit,
such as an Open or a Short on the line. See Table 7.5 for additional infor-
mation. (D15)
Summary of Contents for HPSA-7100-R Series
