Waves HPSA-7100-R Series, Installation And User Manual

Page: 7 / 179

HPSA-7100-R Series Installation and User Manual v
P/N P01- 04946 Rev C
SPECIFICATIONS
‡dB values were determined per ANSI Standard S12.14.
TABLE FR.1
HPSA-7100-R System Specifications
Model Number Number
of
Speakers
Watts
dB‡ (C) @ 100’
(30 m)* 180
o
Effective
Range* - 180
o
Radius @70dB (C)
dB ‡(C) @ 100 ft
(30 m)* 360
o
Effective
Range* - 360
o
Radius @
70dB‡(C)
HPSA-7102-R 2 200 110 1600’ (480 m) 105 1200’ (366 m)
HPSA-7104-R 4 400 115 2400’ (732 m) 110 1600’ (480 m)
HPSA-7106-R 6 600 119 3040’ (927 m) 114 2240’ (683 m)
HPSA-7108-R 8 800 123 4160’ (1268 m) 118 2880’ (878 m)
TABLE FR.2
External Interface Specifications
NAC Input PTT Activation. 9 - 40 VDC, 17 mA Max.
Dry Contact Input PTT Activation (alternative to NAC Input). < 1 K Ohms.
Audio Input 25 V
RMS
or 1 V
RMS
selectable
Optional 70.7 V
RMS and
100 V
RMS
Audio Input requires HPSA-7100-V-KIT
Trouble Outputs Form C, dry contact. 2 Amps., 30VDC (resistive). Max. Trouble Signals (6) provided: AC,
No Battery, Low Battery, Tamper, Amplifier Fault and Driver Fault.
TABLE FR.3
General Specifications
Electronic Cabinet
Dimensions 36” W x 48” H (60” with the pedestals) x 13 3/8” D / 91.4 cm x 121.9 cm (152.4 cm with the
pedestals) x 30.5 cm
Electronic Cabinet
Weight 110 lbs (not including batteries) / 49.9 kg; Total weight with batteries: 322 lbs / 146 kg
Speaker Dimensions 3’ 2” W x 2’ 1” H x 1’ 4 7/16” D / 96.52 cm x 63.5 cm x 41.91 cm (2 speakers with drivers,
omni-directional)
Speaker Weight 52 lbs (23.6 kg) for each speaker and driver kit (pair)
Speaker Material Proprietary aluminum alloy
Battery Weight 53 lbs each / 24 kg (4 required)
Speaker Mounting
Pipe/Pole Minimum 4.5” (11 cm) Outside diameter (OD); Maximum 6” OD (15.25 cm)
Ground Mount
Pedestal Kit Model S32-04517 raises the cabinet 12” (30.5 cm) from the ground
Speaker Cable Kit Model CAB-SPKR-KIT, 500 ft (152 m) long; 16 AWG stranded, non-shielded, marine-
rated, includes driver terminal connectors
Speaker Wire 12 -16 AWG stranded two-conductor jacketed cable. Non-shielded either twisted or non-
twisted. UL/CSA/EU-approved for outdoor use. Connectors are limited to #14 Lug; Installer
should appropriately transition wire to wire lug.
Audio Input Wire Shielded twisted pair cable is recommended for use with the 25/70.7 and 100 V
RMS
Audio
Input connections to the AMB.
The 1 V
RMS
Audio Input cable MUST be shielded twisted pair.
Control Wire It is recommended that all Control cable runs use shielded cable.
Wire Size Ratings Speaker Lines: 12 - 16 AWG (Connectors are limited to #14 Lug; Installer should transition
appropriately wire to wire lug.)
Audio Input and Control Lines: 12 - 22 AWG
AC Mains: 10 - 16 AWG