Waves HPSA-7100-R Series, Installation And User Manual

Page: 6 / 179

iv HPSA-7100-R Series Installation and User Manual
P/N P01-04946 Rev C
OPERATING RESPONSIBILITIES
It is the responsibility of the installer/owner of the product to ensure the following:
• The equipment is correctly and safely installed.
•
When installed, the equipment fully complies with federal, state, and local codes.
• Any person operating this equipment has been properly trained.
•
Any person who has not been trained on the safe use of this equipment does not have access to it.
• Any person operating this equipment has access to all documentation and information required for the safe
use and operation of this equipment.
•
Any person operating this equipment remains alert at all times. Never operate machinery when physically or
mentally fatigued, or while under the influence of alcohol, drugs, or medication.
• The equipment is properly maintained and safety inspected at regularly scheduled intervals.
DISPOSAL CONSIDERATION (EUROPEAN UNION)
This product is a waste electronic equipment in terms of the European Directive 2002/96/EC
(WEEE) and should no be disposed as part of unsorted municipal waste. The relevant national
legal rules are to be followed. A WEEE take-back program has been established through our EU
representative Cooper Fulleon. Refer to www.fulleon.co.uk for WEEE guidance.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. operation of this equipment in a residential area is likely to cause harmful interference n
which case the User will be required to correct the interference at his/her own expense.
ICES INFORMATION (CANADA)
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Réglement sur le matériel brouilleur du
Canada.
APPROVALS
• CE Mark Approval
•
TUV Certification
Designed to meet Life Safety requirements, CE Mark approved and TÜV certification, the HPSA-7100-R Series
integrates directly to an existing audio source, including voice-capable Fire Alarm Control Panels (FACP). The
HPSA-7100-R Series can be also be integrated with Eaton’s SAFEPATH Voice Evacuation Systems (SP40S) and
Mass Notification Systems (SPMNS). Multiple HPSAs can be controlled by one source.