Maintenance: Initial Set-up
AM24480,0000352 -19-06SEP21-1/3
Continued on next page
AM24480,0000352 -19-06SEP21-2/3
Check the saw bar travel
The saw bar travel is powered by back pressure in the
saw return line, while the travel-to-speed pressure is
proportional to the saw motor rpm. As the saw motor
slows down, the travel speed slows down, preventing the
saw chain from ‘stalling out’.
1. Close the grapple arms.
2. Place the felling head in the ‘tilt-up’ position, securely
on the ground.
3. Shut down the carrier.
CAUTION: As the felling head can move or
function unexpectedly, you should always make
sure the carrier is completely shut down, with
the felling head placed securely on flat, level
ground. Failing to follow this process can
increase the risk of serious injury or death.
4. Remove the saw bar cover (1).
1
TX1044994
—UN—02JUL08
1— Saw bar cover
5. Remove the hose (3) and fitting (2).
2— Fitting
3— Hose
2
3
TX1045005
—UN—02JUL08
3-2-4
090621
PN=47
Summary of Contents for FL85
Page 4: ...Introduction 090621 PN 4...
Page 79: ...Index Index 3 090621 PN 79...
Page 80: ...Index Index 4 090621 PN 80...
