Maintenance: Initial Set-up
AM24480,0000351 -19-06SEP21-1/1
Depressurise the air tank
1. Remove the large air inlet cap (2) from the air inlet (1).
2. Remove the small air inlet cap (3) from the valve.
3. Press in on the air inlet pin (4) to release all of the
compressed air.
4. Re-install the small inlet cap (3).
5. Re-install large air inlet cap (2).
IMPORTANT: Ensure you replace both inlet caps
properly; debris can build up in the air
inlet, allowing air to leak from the air tank.
Without the proper air pressure, the saw
bar will not function properly
1— Air inlet
2— Large air inlet cap
3— Small air inlet cap
4— Air inlet pin
2
1
TX1044693
—UN—25JUN08
3
1
TX1044695
—UN—25JUN08
4
1
TX1044715
—UN—25JUN08
3-2-3
090621
PN=46
Summary of Contents for FL85
Page 4: ...Introduction 090621 PN 4...
Page 79: ...Index Index 3 090621 PN 79...
Page 80: ...Index Index 4 090621 PN 80...
