Volkswagen CJDA, Workshop Manual

Page: 487 / 553

– Unscrew securing bolt of starter -arrow-.
– Remove starter downwards.
1.4.2 Installing
Install in reverse order. In the process, note the following:
– Tighten threaded connections to specified torque
⇒
Page 471 .
– With ignition switched off, connect battery.
1.4.3 Specified torques
Threaded connection Specified torque
Starter to power unit M10 40 Nm
M12 60 Nm
Earth wire to securing
bolt of starter M8 15 Nm
Line retainer to securing
bolt for starter M8 15 Nm
Positive wire to solenoid
switch of starter M8 15 Nm
2 Alternator -C-
WARNING
Adhere to the general safety regulations and the notes on
repair work on the engine!
⇒
Page 1
Observe rules for cleanliness
⇒
Page 354 .
Assembly overview - alternator -C-
⇒
Page 472 .
Tightening sequence and specified torque, ancillary bracket to
cylinder block
⇒
Page 144 .
Checking alternator -C- and voltage regulator -C1-
⇒
Page 474 .
Removing and installing alternator -C-
⇒
Page 475 .
Removing and installing voltage regulator -C1-
⇒
Page 477 .
Removing and installing poly V-belt pulley
⇒
Page 480 .
Checking operation of freewheel clutch
⇒
Page 485 .
Industriemotoren - Industrial Engines 2009
▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
3
2 Alternator -C- 471