Vivo 65 User Manual Download Page 48 | Manualshive

Page: 48 / 228

Vivo 65 User Manual Download Page 48

48 How to Use the Vivo 65

Vivo 65 users manual

Doc. 006088 En-US U-1b

4. Navigation Field

This field is mainly used for displaying the section layout of the menu, and
determines the function of each navigation button.
Depending on the current operation, the navigation buttons can be
assigned temporary functions such as “Yes” or “Next”, depending on
which operation is active.

The Setup Section

In the Setup section, treatment parameters can be altered. See “Functions
and Parameters in the Vivo 65” on page 57.

Home Adjust

The Home Adjust function can be activated by the care provider. When
activated, the care provider can unlock treatment parameters and define a
limited setting range. The patient and lay care giver can change these set-
tings within the limited range when the Vivo 65 is in Home mode.
Black color indicates that the parameter is possible to adjust within a cer-
tain settings range. Grey color indicates that the parameter is locked.

«
...
46
47
48
49
50
...
»

Summary of Contents for 65





































































































































































































































Reviews:

No comments