manualshive.com logo in svg

Vivo 65, User Manual, Page: 165 / 228

Share
Download
Vivo 65 User Manual Download Page 165

165

Cleaning and Maintenance

Vivo 65 users manual

Doc. 006088 En-US U-1b

7

Cleaning and Maintenance

The patient-connected parts and the filter must be cleaned and replaced
regularly to ensure correct function of the Vivo 65. All replaced parts
must be disposed of in accordance with local environmental regulations
regarding the disposal of used equipment and waste.

WARNING!

•

The Vivo 65 should undergo maintenance, service and control
procedures, as well as any applicable upgrades, in accordance
with Breas service instructions.

•

The Vivo 65 shall only be repaired or modified in accordance with
Breas service manuals, technical bulletins, and any special ser-
vice instructions, by service technicians that have been author-
ized after Breas Vivo 65 service training.

•

Do not under any circumstances attempt to service or repair the
Vivo 65 yourself. If you do so, the manufacturer will no longer be
responsible for the performance and safety of the Vivo 65.

D

EVIATION

 

FROM

 

THESE

 

SERVICE

 

INSTRUCTIONS

 

MAY

 

LEAD

 

TO

 

RISK

 

OF

 

PERSONAL

 

INJURY

!

Summary of Contents for 65





































































































































































































































Reviews:

No comments