manualshive.com logo in svg

Vivo 65, User Manual, Page: 28 / 228

Share
Download
Vivo 65 User Manual Download Page 28

28 Product Description

Vivo 65 users manual

Doc. 006088 En-US U-1b

This product must not be exposed to open
fire.
This product should be recycled.

Read “Disposal” on page 171 for informa-
tion about recycling and disposal.

Degree of protection provided by enclosure.
The Vivo 65 is rated IP22, which means it is
protected from touch by fingers and objects
greater than 12 mm, and protected from
water spray less than 15 degrees from verti-
cal.
Class II equipment; double insulation.

Body floating (IEC 60601-1 Type BF, Iso-
lated Applied Part)
(Symbol only applicable in U.S.)
Caution: U.S. Federal law restricts this device
to sale by or on the order of a licensed health-
care practitioner.
Conforms to IEC 60601-1:2012 including
ANSI/AAMI ES60601-1:2005
Conforms to CAN/CSA C22.2 No. 60601-
1:08.
CE marking applies in accordance with the
directive MDD 93/42/EEC.

Manufacturer

Keep Dry

Summary of Contents for 65





































































































































































































































Reviews:

No comments