manualshive.com logo in svg

Vivo 65, User Manual, Page: 103 / 228

Share
Download
Vivo 65 User Manual Download Page 103

103

How to Use the Vivo 65

Vivo 65 users manual

Doc. 006088 En-US U-1b

CO

2

 Zeroing

CO

2 

zeroing is recommended when changing the airway adapter. Besides

from that, zeroing only needs to be performed when an offset in moni-
tored CO

2

 values is observed, or when a CO

2

 sensor accuracy unspeci-

fied message is displayed.  

Maintenance

No periodical maintenance is required for the CO

2

 sensor.

5

Make sure to position the CO

2

 

sensor with the LED pointing 
upwards.

The CO

2

 sensor is not intended to be in contact with the patient body.

CO

2

 zeroing can be performed from the “FiO

2

/CO

2

 Calibration” page under the

“Others” section.

LED S

TATUS

D

ESCRIPTION

Steady green light

System OK

Flashing green light

Zeroing in progress

Steady red light

Sensor error

Flashing red light

Check adapter

Summary of Contents for 65





































































































































































































































Reviews:

No comments