manualshive.com logo in svg

Vivo 65, User Manual, Page: 65 / 228

Share
Download
Vivo 65 User Manual Download Page 65

65

How to Use the Vivo 65

Vivo 65 users manual

Doc. 006088 En-US U-1b

Sigh

I

TEM

D

ESCRIPTION

Definition

A Sigh is a breath where an increased % of
the set pressure or volume is delivered to the
patient. The frequency of the Sigh breaths is
selectable and settable to be delivered by the
device every 50, 100, 150, 200 or 250 manda-
tory or assisted breaths.

If the High Pressure alarm or the High Tidal
Volume alarm is active, the Sigh function will
be disabled. Once the alarm condition has
been resolved, the Sigh function will con-
tinue operating.

Modes

PSV, PSV(TgV), PCV, PCV(TgV), PCV(A),
PCV(A+TgV), VCV, VCV(A)

Setting min

Sigh rate:

 Off, every 50 breaths.

Sigh %:

 125% of actual set pressure or vol-

ume.

Setting max

Sigh rate:

 Every 250 breaths.

Sigh %:

 200% of actual set pressure or vol-

ume. Limited to 50 cmH

2

O or 2000 ml

(Adult), 35 cmH

2

O or 500 ml (Pediatric).

Setting resolution

50 breaths (frequency).
25% (pressure and volume)

Display

Summary of Contents for 65





































































































































































































































Reviews:

No comments