Home
/
Vivo
/
65
/
User Manual

Vivo 65, User Manual, Page: 105 / 228

Share

Page: 105 / 228

Vivo 65 User Manual Download Page 105

105

How to Use the Vivo 65

Vivo 65 users manual

Doc. 006088 En-US U-1b

Using the Vivo 65 with the Trolley

Mount and dismount the Vivo 65 as shown in the picture:

Using the Vivo 65 with the Protective Cover

The protective cover is intended for additional protection of the Vivo 65
during transportation, and in hospital, institutional and home care envi-
ronments. It can be used while the Vivo 65 is operating, for example
mounted on a wheelchair, in a personal vehicle, or carried by hand.
Do not use the Vivo 65 in the protective cover while positioned in a
warm place, such as direct sunlight or close to a radiator.

• Be careful when handling the trolley with the ventilator mounted, in

order to avoid any risk of the trolley falling. The trolley can be tipped
10° and return to vertical position, when loaded in accordance with
the weight specifications below.

• The total maximum load of the trolley is 52 lbs (24 kg).
• The maximum load of the trolley basket is 2 lbs (0.9 kg).

«
...
103
104
105
106
107
...
»

Summary of Contents for 65





































































































































































































































Reviews:

No comments