Transcendent NVR Series
55
Zoom In
Click to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live preview interface.
Add Tag
Click to add tag. You can play back the recording by searching
the added tag. Click and then input the tag name in the popup
window. Click “Add” to add tag.
Switch Camera
Click to switch the playback camera. Click and then check the
camera in the popup window. Click “OK” to change the camera.
Close Camera
Click to close the playback camera.
Introduction of area
④
:
Click
to set the date; click
to set the time and then the playback will play the
recording from the time you set. You can check the record type as required for record playback;
first you should click
on the tool bar at the bottom of the interface to clear all the playback
cameras, then check the record type (
: manual record;
: sensor based record;
:
motion based record;
: schedule recording) and finally click
in the playback window
to add camera for playback (the recording time scale will show the record data of the checked
record type only after the above operations).
Introduction of the record time scale (area
⑤
) :
A tool bar will appear after moving the mouse to the record time scale. Click
/
to
zoom in/out of timeline; click
to recover the timeline to 24 hours’ ratio. Drag the
timeline or slide the scroll wheel of the mouse on the time scale to show hidden time on the top
or bottom of the timeline. You can also click
to show the hidden time on the top of the
timeline or click
to show the hidden time on the bottom of the timeline. Drag the slider
at the bottom of the time scale to show hidden playback cameras.
The record time scale shows different record types with different colors. The green block
stands for manual record, red block stands for sensor based record, yellow block stands for
motion based record and blue block stands for schedule record. Click the record block to set the
time and then the camera will play the recording from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or
click
to pop up a backup information window. Click “Backup” button in the window to
pop up the backup window. Select the device, backup path and backup format and then click
“Backup” button to start the backup.
8.3 Record Search & Playback
8.3.1 Search & Playback by Time-sliced Image
�
Click Start
à
Search
à
By Time-sliced Image to go to “By Time-sliced Image” tab. There
are two view modes: by time and by camera. In the time view mode, a maximum of 64 camera
thumbnails can be showed. If the camera thumbnail number is more than 64, the cameras will
be listed directly by their camera name, not the thumbnail. A maximum of 196 camera names
can be listed. If the camera name number is more than 196, the time view mode will be
disabled and the camera view mode will be available only.
Transcendent NVR Series
56
�
Select one camera in the interface and then click “Open” button.
�
Click the image box to play the record in the small playback box on the left side of the
interface (the box which has image inside indicates that the record data exist).
�
Refer to the picture below. Drag the color blocks on the time scale to select the record data
and then click “Backup” button to pop up a window; select the device, backup path and backup
format in the window and then click “Backup” button to start the backup.
�
Click “Playback” button to play the recording in the playback interface (refer to 8.2
Playback Interface Introduction for details). Click “Close” to close the interface.