Vitek Transcendent Series Manual Download

Page: 69 / 104

Transcendent NVR Series

to save the settings.

9.4.4 Buzzer

Click Start

Settings

Alarm

Event Notification

Buzzer to go to the buzzer configuration

interface. Set the delay time of the buzzer and then click “Apply” to save the setting. You can
click “Test” to test the buzzer.

9.5 Manual Alarm

Click

on the tool bar at the bottom of the live interface to pop up a window. Click

“Trigger” to start alarm. Click “Clear” to stop alarm.

Transcendent NVR Series

9.6 View Alarm Status

Click Start

Settings

Alarm

Alarm Status or click

on the tool bar at the bottom of the

live preview interface to view the alarm status.

Click “Clear” button to stop the buzzer when the buzzer alarm happens. Click

to view

the detail information as shown below.

If the exception information is more than one page, you can input the number in the box and
then click

to jump to the specified page. Click

to view the exception

alarm information in the previous/next page. Click

to play the alarm record.

Account & Permission Management

10.1 Account Management

Click Start

Settings

Account and Authority

Account

Edit User to go to the interface as

Summary of Contents for Transcendent Series









































































































Search results

Summary of Contents for Transcendent Series

Reviews:

Related manuals for Transcendent Series

Brands by name

Popular brands

Vitek Transcendent Series, Manual

Search results

Summary of Contents for Transcendent Series

Reviews:

Related manuals for Transcendent Series

Brands by name

Popular brands