Transcendent NVR Series
7
l
Support camera group view and scheme view in sequence, quick sequence view and dwell
time setting
l
Motion detection and video mask
l
P.T.Z. control protocol and setup of presets and cruises
l
Support single camera zoom by the scroll wheel of the mouse
l
Support any area of the image to be zoomed in to a maximum of 16 times of the current
size
l
Support image and lens adjustment (Camera dependent)
Disk Management
l
The NVRs with the 2U case can add a maximum of 8 SATA HDDs, a maximum of 2
SATA HDDs with the 1U case and a maximum of 1 SATA HDD with the small 1U case
l
Each SATA interface of the NVR support HDDs with max 8TB storage capacity
l
Some of the NVRs support recording to be backed up by e-SATA HDD
l
Support disk group configuration and management and each camera can be added into
different disk groups with different storage capacity
l
Support disk S.M.A.R.T Information
l
Support batch formatting of the HDD’s
Record Configuration
l
Main stream and sub stream recording at the same time and batch or single configuration
of the record stream
l
Manual and auto record modes
l
Schedule recording, sensor alarm recording and motion detection recording
l
Schedule recording and event recording setting with different record streams
l
Record schedule setting and recycle recording
l
Support pre recording and delay recording configuration of event recording
Record Playback
l
Record searching by thumbnail /time/event/tag
l
Thumbnail search by month, by day, by hour and by minute and time slice to be displayed
with camera
l
Maximum of 16 cameras to be searched by time
l
Event searching by manual/motion/sensor events
l
Tag searching by manually added tags
l
Instant playback of the selected camera in the live preview interface
l
16 camera playback
l
Support acceleration(maximum 32 times of the normal speed), deceleration (minimum
1/32 times of the normal speed) and 30s’ addition or reduction to current playing time
Record Backup
l
Support recording to be backed up through USB (U disk, mobile HDD) or e-SATA
interface
l
Support recording to be backed up by time/event/image searching
l
Support record cutting for backing up when playing back
l
Support a maximum of 10 backup tasks in background and backup status viewing
Transcendent NVR Series
8
Alarm Management
l
Alarm schedule setting
l
Support enabling or disabling of the motion detection, external sensor alarm input and
exception alarms including IP address conflict alarm, disk IO error alarm, disk full alarm, no
disk alarm, illegal access alarm, network disconnection alarm, IPC offline alarm, alarm trigger
configuration support
l
IPC offline alarm trigger configuration of PTZ, snapshot, pop-up video, etc.
l
Event notification modes of alarm-out, pop-up video, pop-up message box, buzzer, e-mail
l
The snapshot images can be attached into an e-mail when alarm linkage is triggered
l
Alarm status view of alarm-in, alarm-out, motion detection and exception alarm
l
Alarm triggered and cleared manually
l
System auto reboot when exception happens
Network Functions
l
Support TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol
l
Allow and block list function of IP address/IP segment/MAC address
l
Support multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only
for versions lower than 45) and Safari in MAC system
l
Remote configuration, import and export of the NVR parameters and other system
maintenance operations including remote upgrading and system restart
l
Remote camera configuration of the NVR including video parameters, image quality
l
Remote searching, playback and backup of the NVR
l
Manual alarm can be triggered and cleared remotely
l
Supports NAT function and QRCode scanning by mobile phone and PAD
l
Support mobile surveillance by phones or PADs with iOS or Android OS
Other Functions
l
The NVR can be controlled and operated by the buttons on the front panel (model
dependent), the remote control and the mouse
l
Supports NVR information viewing including basic, camera status, alarm status, record
status, network status, disk and backup status
l
Factory default, import and export of the system configuration, log view and export and
local upgrading by USB mobile device
l
Auto recognition of the display resolution
1.3 Front Panel Descriptions
The following descriptions are for reference only.
Type I:
Name
Descriptions
REC
When recording, the light is blue
Net
When access to network , the light is blue
Power
Power indicator, when connection , the light is blue
Fn
No function temporarily
