Transcendent NVR Series
53
8.2 Playback Interface Introduction
Click
on the tool bar at the bottom of the live preview interface or click Start
à
Playback
to go to the playback interface as shown below (click
on the tool bar at the bottom of the live
preview interface to set the default playback time).
The added cameras will playback in the playback interface automatically. You can also add the
camera manually. Click
in the playback window to pop up the “Add Camera” window.
Check the cameras in the window and then click “Add” to add camera. The system supports a
maximum of 16 synchronous cameras.
The buttons on the tool bar (area
①
) at the bottom of the playback interface are introduced in
the table below.
Button
Meaning
Transcendent NVR Series
54
Button
Meaning
Start button. Click it to pop up area
②
.
Full screen button. Click it to show full screen; click it again to exit the full
screen.
Screen mode button.
OSD ON button. Click it to enable OSD; click
to disable OSD.
Stop button.
Rewind button. Click it to play video backward.
Play button. Click it to play video forward.
Pause button.
Click to decrease the playing speed.
Click to increase the playing speed.
Previous frame button. It works only when the forward play is paused in single
screen mode.
Next frame button. It works only when the forward play is paused in single
screen mode.
Click
to go back 30s and click
to go forward 30s.
Event list/tag button. Click it to view the event recording of
manual/schedule/sensor/ motion and tag information.
Backup button. Drag the mouse on the time scale to select the time periods and
cameras, and then click the button to back up the record.
Backup status button. Click it to view the backup status.
Back button. Click it to return.
Introduction of area � :
Button
Meaning
Click to go to record search interface; see 8.3 Record Search & Playback for
details.
Click to go to backup interface; see 8.4 Backup for details.
Click to go to live preview interface; see Chapter 5 Live Preview Introduction
for details.
Click on the playback window to show the tool bar as shown in area
③
; right click on the
window to show the menu list. The tool bar and menu list are introduced in the table below.
Button
Menu List
Meaning
--
Move tool. Click and hold to move the tool bar anywhere.
Enable Audio
Click to enable audio. You can listen to the camera audio by
enabling audio.
Snap
Click to take a snapshot.
