Transcendent NVR Series
65
�
Enable or disable “Snap”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”.
The alarm handling setting of motion alarm is similar to that of the sensor alarm (see 9.1
Sensor Alarm for details).
�
Click “Apply” to save the settings. You can click “Motion Settings” to go to the motion
configuration interface.
9.3 Exception Alarm
9.3.1 Exception Handling Settings
�
Click Start
à
Settings
à
Alarm
à
Exception
à
Exception Handling Settings to go to the
interface as shown below.
�
Enable or disable “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The
exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm for
details).
�
Click “Apply” to save the settings.
9.3.2 IPC Offline Settings
�
Click Start
à
Settings
à
Alarm
à
Exception
à
IPC Offline Settings to go to the interface as
shown below.
Transcendent NVR Series
66
�
Enable or disable “Snap”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”, “Pop-up
Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor alarm
(see 9.1 Sensor Alarm for details).
�
Click “Apply” to save the settings.
9.4 Alarm Event Notification
9.4.1 Alarm-out
�
Click Start
à
Settings
à
Alarm
à
Event Notification to go to the following interface.
�
Set the delay time and the schedule of each alarm-out. You can click “Edit Schedules” to
edit the schedules (see 7.3.1 Add Schedule for details).
�
Click “Apply” to save the settings. You can click “Test” to test the alarm output.
9.4.2 E-mail
Click Start
à
Settings
à
Alarm
à
Event Notification
à
E-mail to go to the e-mail configuration
interface. Set the e-mail address of the recipients. See 11.1.4 E-mail Configuration for details.
9.4.3 Display
Click Start
à
Settings
à
Alarm
à
Event Notification
à
Display to go to the display configuration
interface. Set the duration time of the pop-up video and the pop-up message box. Click “Apply”
