Transcendent NVR Series
61
�
Click
to set the start time and end time on the left top of the interface.
�
Check the event types and cameras.
�
Click
to search the record. The searched record data will be displayed in the list.
Click
in the list to play the recording in a small popup playback window. Click
to
backup the recording. Check one recorded data or above in the list and then click “Backup”
button to back up the recorded data.
8.4.3 Image Management
Click Start
à
Backup
à
Image Management to go to “Image Management” tab. The system will
display all the snapshot images automatically in the list.
Click
to delete the image. Click
to pop up the “Export” window. Select the device
name and save path in the window and then click “Save” button.
Click
to pop up the “View Image” window. Click
to export the image. Click
to view the previous image; click
to view the next image; click
to delete the image;
click
to play all the images.
Transcendent NVR Series
62
8.4.4 View Backup Status
Click Start
à
Backup
à
Backup Status or click
on the tool bar at the bottom of the
playback interface to view the backup status.
9
Alarm Management
9.1 Sensor Alarm
To complete the entire sensor alarm settings, you should enable the sensor alarm of each
camera and then set up the alarm handling of each camera.
�
Click Start
à
Settings
à
Alarm
à
Sensor Alarm to go to the following interface.
�
Select the alarm type (NO or NC) according to trigger type of the sensor.
�
Enable the sensor alarm of each camera.
�
Check the “Record”, “Snap”, “Alarm-out” and “Preset” and enable or disable the
“Buzzer”, “Pop-up Video”, “Pop-up Message Box” and “E-mail” as required.
�
Click “Apply” to save the settings.
The configuration steps of the above mentioned alarm linkages are as follows.
Record
: check it and then the “Trigger Record” window will pop up automatically (you can
also click “Configure” button to pop up the window). Select camera on the left side and then
