Transcendent NVR Series
23
3.2 Main Interface
3.2.1 Main Interface Introduction
The buttons in area � are introduced in the table below.
Button
Meaning
Start button. Click to pop up area
③
.
Full screen button. Click to show full screen; click again to exit the full
screen.
Screen mode button.
Dwell button (see 5.2.2 Quick Sequence View and 5.2.4 Scheme View In
Sequence for details).
Click to enable OSD; click
to disable OSD.
Click to set the default playback time before starting instant playback (8.1
Instant Playback) or going to the playback interface for playback operations
(8.2 Playback Interface Introduction); click
to go to the playback
interface. For instance, if you choose “5 minutes ago” as the default playback
time, you can playback the recording from the past five minutes.
Manual record button. Click to enable/disable record.
Manual alarm button. Click to trigger or clear the alarm-out manually in the
popup window.
Record status button. Click it to view the record status.
Alarm status button. Click it to view the alarm status.
Disk status button. Click it to view the disk status and RAID status.
